Copper Multi-Flue Cap with Basic Lid, Outside Mount

The Copper Outside Mount Chimney Cap with Basic Lid is a proven, tried-and-tested chimney cap. A solid chimney cap that ensures the top & inside of your chimney stays dry. Made for easy installation, it features an outside mount design that will snugly fit over your chimney. Easily installs with silicone and masonry screws (included).

This cap is equipped with a 2" horizontal skirt that provides a ledge for the cap to be supported by the outside edge of the chimney. Features a 3" vertical skirt extending down each side of the chimney, allowing you to attach the cap to the sides of the chimney. The vertical side skirt has a drip edge to help divert rainwater from running straight down the chimney sides.

Moreover, the lid of the Copper Outside Mount Chimney Cap is removable with locking nuts. This allows you to easily access and clean the chimney flues. The copper cap has a 2" lid overhang from the 3/4" mesh screen.

Installation

With a 3" vertical skirt, you will be able to easily install your new Copper Outside Mount Chimney Cap on the exterior perimeter of the brick chimney. Add a bead of silicone on the inner skirt panel and simply slide the outside mount cap over the chimney.

Using a drill bit, pre-drill the pilot holes through the skirt panel and into the chimney. Secure the cap with masonry screws and silicone. Depending on cap size, we recommend adding 2-3 masonry screws evenly spaced along the sides of the cap. That usually works out to be 18 to 24 inches between masonry screws.

With the measurements you provide, we will fabricate the cap for a perfect fit. Removable lid for easy access, cleanings, and maintenance. Features a lid overhang of 2" on all sides of the mesh screen.

Why Choose Our Copper Outside Mount Chimney Cap

When choosing a multi-flue chimney cap, copper is a luxurious option that will protect and add value to your home. You are choosing to install a chimney cap that will last a lifetime, never rust, and offer protection for your chimney.

Keeping critters, rain, snow, and debris is valuable in itself while also protecting the chimney from deterioration. Fabricated from 16 ounce copper, this copper chimney cap is built to last. Backed by a lifetime warranty against rust or defects. Proudly made in the USA, you can trust the superior craftmanship and durability of our Outside Mount chimney cap.

Add beauty & curb appeal to your chimney by installing a real copper chimney cap that will patina over time.

Measuring for Your Copper Outside Mount Chimney Cap

Measure your chimney to ensure a custom fit with our measuring tips. Provide your measurements and we will fabricate the copper chimney cap accordingly.

Most importantly, we recommend adding at least 1/4" extra allowance to the exact length and width measurements of the masonry chimney. Having this extra allowance will ensure a snug fit while also properly covering the outer bricks.

Screen height size is recommended to be at least 6" taller than the top of the flue tile. For example, if the tallest clay flue tile is 6" tall then we would like to see the screen height size at least 12" tall.

Note: Copper Multi-Flue Caps are made custom per order and are non-returnable. With a fabrication time of 1-2 weeks, your chimney protection solution is just around the corner.

When measuring for your Outside Mount Copper Chimney Cap, here are the things you will need to consider:

• Overall length of chimney (we recommend adding 1/4" to the exact measurement)
• Overall width of chimney (we recommend adding 1/4" to the exact measurement)
• Screen height (should be at least 6" higher than the tallest flue)
• Measuring Form (Printable PDF)