Clearance Items

$43.99

These products do not have any faults - new in box items. Note: Double wall stove pipe is only compatible with the same manufacturer's brand pipe, therefore this can only be used with Selkirk Black Double Wall Pipe. The main listings of Double Wall pipe on our website are not... Read More

$84.99

These products do not have any faults - new in box items. Note: Double wall stove pipe is only compatible with the same manufacturer's brand pipe, therefore this can only be used with Selkirk Black Double Wall Pipe. The main listings of Double Wall pipe on our website are not... Read More

$82.99

These products do not have any faults - new in box items. Note: Double wall stove pipe is only compatible with the same manufacturer's brand pipe, therefore this can only be used with Selkirk Black Double Wall Pipe. The main listings of Double Wall pipe on our website are not... Read More

$45.00

The Rigid Terra-Cotta Mount Top Plate 6" x 8" 13" is used if you have clay tile in your chimney and it's exposed by 1/2” or more at the top of your chimney. The top plate will pressure bolt to the outside of the protruding clay flue tile. Made with... Read More

$45.00

The Rigid Flat Top Plate 6" x 9" X13" fits flush to the chimney top. Use the flat top plate if you do not have terra-cotta tile projecting above the chimney crown or you can install it on top of the terra-cotta tile. Made with stainless steel and has 2"... Read More

$50.00

This 10" WeatherShield Chimney Cap Non Air Cooled Chimney Cap is on clearance due to a few dents on the edge of the cap and the connection collar. The connection collar will take the correct form once the compression sleeve is inside a pipe. The bottom base of the cap... Read More

$50.00

This 6 in. x 90-degree adjustable Rock-Vent single wall black stove pipe is on clearance due to some imperfections on the finish. Some oil from the tooling leaked out on these elbows and they do not meet our high standards for the parts we fabricate. A little cleaning and touch-up... Read More

$54.99

These products do not have any faults - new in box items. Note: Double wall stove pipe is only compatible with the same manufacturer's brand pipe, therefore this can only be used with Selkirk Black Double Wall Pipe. The main listings of Double Wall pipe on our website are not... Read More

$65.00

This 8 in. x 48 in. Black single wall stove pipe has a few scratches and large dents in the middle of the pipe and also on the ends of the pipe. Will work great for a shop or garage setup. Use Rock-Vent single wall stove pipe when you have... Read More

$105.79

Priced for liquidation. Please reach out with any questions. No returns accepted on these clearance products. Selkirk SuperPro / ShelterPro 6 in. Stainless Steel Class A Chimney 18 in

$44.99

Priced for liquidation. Please reach out with any questions. No returns accepted on these clearance products. Selkirk SuperPro / ShelterPro 6" Spark Arrestor

$350.00

8x8 Locktop II damper, Missing Hardware This lock top damper is missing the hardware pack, the cable is included. Will work great for parts or someone that can fabricate the hardware. The Lock Top II Chimney Damper With Cap is the perfect solution for cold & drafty wood burning fireplaces.  Read More

$40.00

This 6” x 17” Rock-Vent single-wall black stove pipe is on clearance due to the female end being dented and scratched. This would be perfect if you need a small section of pipe that you could cut. You could also attempt to ovalize the pipe to fit an older stove... Read More

$70.00

6 in. x 48 in. 304 stainless steel pipe, the pipe is slightly oval and can be reformed to the round shape. 24 gauge stainless steel, smooth inside wall provides ideal draft and flow. For use with wood and wood pellet-burning appliances. Four Available. Sold As Is Non-Returnable. Read More

$275.00

This 8” x 48” Rock-Vent 304L inner, 430 outer Class A chimney pipe is on clearance due to a few slight dings on the side of the class A pipe. These are small dings and do not affect the overall performance or safety of the system. This would be perfect... Read More

$150.00

This 6” x 24” Rock-Vent 316L inner, 430 outer Class A chimney pipe is on clearance due to a few slight dings on the side of the class A pipe. These are small dings and do not affect the overall performance or safety of the system. This would be perfect... Read More

$60.00

This 8 in. x 45-degree adjustable Rock-Vent single wall black stove pipe is on clearance due to some imperfections on the finish. Oil from the tooling leaked onto these elbows and they do not meet our high standards for the parts we fabricate. A little cleaning and touch-up paint will... Read More

$400.00

The US Fireplace Top Damper 18" x 18" has a dent on the corner, damper still seals tight, provides an energy tight seal for any fireplace while also providing rain and animal protection. Sold as is, non-returnable. One Available. Read More

$750.00

8" x30 Degree Class A Elbow Kit New - Clearance Galvalume Rock-Vent Class A Chimney Pipe Elbow Kits 30 degree options. Each elbow kit includes 2 elbows and 1 elbow support. Elbows are used to offset obstructions such as framing joists in your installation. The elbow support is required between... Read More

$65.00

8" x 24" 304L Stainless Steel Rigid Chimney Liner Dented - Clearance 8 in. x 24 in. 304L Rigid Stainless Steel pipe. The pipes have a few dents on the ends but can be easily straightened out. They would be great for a shop or garage setup. 24 gauge stainless... Read More

$60.00

4" to 3" Pellet with No Tee Cap - Clearance The Pellet Tee connects a 3” pellet stove to a 4” chimney liner. This connector features a removable snout and the quick connect band. (no Tee Cap) Read More

$70.00

Selkirk Double Wall 8"x12"Slightly Scratched. Sold as is, non-returnable. One available. Selkirk Double Wall Black Pipe is most commonly used as interior connector pipe. The 8" diameter is the inner diameter measurement. For installed lengths, remember to subtract 1-3/8" per joint. Minimum clearance to combustibles is 8". The maximum recommended... Read More

$150.00

Selkirk #208012U- light denting on outer inner good, This 8 in. x 12 in. Selkirk Ultra-Temp has a large dent on the outer stainless coating. There are no defects to the inner liner of the pipe. The Selkirk Metalbestos Chimney System is ideal for venting residential heating appliances burning wood,... Read More

$100.00

Selkirk 6"x36"- DSP double wall- light denting and scratches. Note: Double wall stove pipe is only compatible with the same manufacturer's brand pipe, therefore this can only be used with Selkirk Black Double Wall Pipe. The main listings of Double Wall pipe on our website are not compatible with this... Read More

$100.00

The stainless steel flue cap would fit an 14" x 10" flue/chimney, this would have pressure bolts to adhere it to the side of the chimney tile. Read More

$60.00

8 3/4" x 6 1/2" rectangle female to 8" round male, Mates a dripless connection between rectangle flex liner and the round opening or vertical pipe on your appliance. Read More

$60.00

Female to male dripless seam. bottom 8 5/8" x 4 1/4"- top 10" x 5" Connect flex to flex, rigid to flex, and more. Read More

$70.00

Terra-Cotta Top Plate 8" x 13" x13" (no-Drip Edge) fastens right on the terra-cotta flue tile. The top plate pressure screws to the tile like a traditional single flue cap and gives a great no hassle, finished look. No drilling or cutting required! The collar quick-connect band clamp securely tightens... Read More

$150.00

6” Rock-Vent Double wall Black stove pipe 48” in length, this pipe has some scratches and dents in the outer shell and the inner stainless sleeve is free of defects.  Compatible with our black stove pipe along with Ventis, Champion, and Nexvent-19   One Available. Non-Returnable.   Read More

$200.00

10” x 48” 316L  stainless steel pipe, the pipes have a few dents on the end and a slight oval shape from shipping damage which can be straightened out. Great for a shop or garage setup. It has a smooth interior wall providing you with optimum draft and flow. Use... Read More

$100.00

This 6" x 8” x 13” Deluxe Hinged Terra-Cotta Top Plate With Rain cap is missing 2 of the threaded mount Inserts and would only have 2 bolts attached to the Cap to one size.  You will need 1.5" of clay tile protruding from the chimney crown to attach the... Read More

$175.00

Upgrade and enhance your Napoleon BT36K Premium 3" beveled trim kit-Black today. Color: Black, 3" thick, Sleek, black beveled finish trim. Applicable Napoleon fireplaces: 35" Ascent fireplace, 36" Ascent fireplaces, 36" Ascent X fireplace One Available. Non-Returnable.   Read More

$225.00

Napoleon's 36 in" Westminster Grey Herringbone Decorative brick panels made for use with Napoleon Ascent Series Gas Fireplace.  (3) pc. set- (2) sides 11" x 20 1/2"- (1) rear 16 1/4" x 15 3/4" One Available. Non-Returnable. Read More

$35.00

This cable is in new condition. This cable shield is helpful when installing a Lyemance damper cable. If the cable has to make a bend around a corner, such as with a lintel or smoke shelf, then this cable shield will protect it from friction fraying. One Available. Non-Returnable.   Read More

$80.00

Rock-Vent Pellet pipe 3 in. diameter and 48 in. long. This pipe has some minor scratches throughout the pipe also a few small dents on the pipe and end of the pipe. Rock-Vent Pellet Pipe is fabricated with a 304L stainless steel inner wall with a galvalume outer wall to... Read More

$150.00

6 in. Rock-Vent Double Wall Black stove pipe 48 in. length. This pipe has some scratches and dents in the outer shell and also a large dent on the female end. The inner stainless sleeve is free of defects.  The stainless steel inner liner, 1/2" air space, and outer casing... Read More

$165.00

These Wood Grain Stove Boards are floor samples in new condition. The HY-C Type 2 Stove Board Hearth Extender protects the floor in front of your fireplace from intense heat that stoves can produce. Non-Returnable. One Available. Read More

$150.00

11 in. x 48 in. 304L stainless steel pipe. The pipes have a few dents on the end and can be straightened out. The pipes will work very well in a shop or garage environment. The smooth interior wall provides ample draft and flow. Use for wood and wood pellet-burning appliances. Non-Returnable. Two Available. Read More

$100.00

The 16 in. storm collar has a cosmetic dent on the collar. Install the stainless steel storm collar around the rigid liner right above the support clamp to keep moisture from entering the flue liner or the chimney cavity. Non-Returnable. One Available. Read More

Sold out

$200.00

This 6 in. x 36 in. Selkirk Ultra-Temp has a large dent on the outer stainless coating. There are no defects to the inner liner of the pipe. The Selkirk Metalbestos Chimney System is ideal for venting residential heating appliances burning wood, #2 oil, and natural and LP gas. Selkirk... Read More

$25.00

This stove rope gasket is in new condition and measures ⅝ in. x 84 in. The braided gaskets are manufactured from textured fiberglass for high-temperature sealing up to 1000° F. The graphite infused material is soft and flexible and suitable for most gasket applications.  Color: Black. One Available. Non-Returnable.  Read More

$160.00

6 in. Rock-Vent Double wall Black stove pipe 48 in. length. The pipe has some scratches and dents in the outer shell, and the inner stainless sleeve is free of defects. Two Available. Non-Returnable. Read More

$200.00

6 in. Rock-Vent Double wall Black stove pipe 48 in. length. This pipe has some scratches and dents in the outer shell. The inner stainless sleeve is free of defects. One Available. Non-Returnable. Read More

$55.00

9 1/8 in. inner diameter Black Single wall trim ring, outside diameter of the ring is 16 in.  The trim ring has some scratches.  Black 22 gauge trim collar for use with single wall stove pipe. It covers the excess area around flue opening and provides a finished look to... Read More

$50.00

Rock-Vent Pellet pipe 4 in. diameter and 12 in. long. The pipe has some minor scratches throughout. Fabricated with a 304L stainless steel inner wall with a painted black galvalume outer wall. Use to safely vent pellet stoves that are vented direct through the wall or  vertically passing through combustibles... Read More

$55.00

6 in. x 24 in. 304 stainless steel pipe, the pipe is slightly oval and can be reformed to the round shape.  24 gauge stainless steel, smooth inside wall provides ideal draft and flow. For use with wood and wood pellet-burning appliances. One Available. Non-Returnable.  Read More

$65.99

This DuraVent Direct Vent pipe is 4 in. inner x 6 5/8 in. outer and the length is 9 on.,  a few paint defects on this Pipe, but in good working condition. DuraVent Direct Vent Pro Chimney Pipe is engineered and approved to vent just about any gas and propane... Read More

$50.00

This Heatfab Brand 6 in. diameter single wall stove pipe is 18 in. length, the pipe has some scratches and a small dent.  You can use single wall stove pipe when you have a minimum of 18 in. clearance to combustibles. Single wall chimney stove pipe is a 22-gauge cold... Read More

$125.00

This custom oval-to-round 5 in. x 12 1/2 in. oval to 6 in. round adaptor is in new condition. It mates a dripless connection between the oval flex liner and the round opening or vertical pipe on your appliance. The quick-connect clamp on the oval end ensures a seal-tight connection... Read More

$74.89

Priced for liquidation. Please reach out with any questions. No returns accepted on these clearance products. Selkirk SuperPro / ShelterPro 8" Stainless Steel Class A Chimney, 6"

$237.99

Priced for liquidation. Please reach out with any questions. No returns accepted on these clearance products. Selkirk SuperPro / ShelterPro 8" Stainless Steel Class A Chimney, 18"

$132.29

Priced for liquidation. Please reach out with any questions. No returns accepted on these clearance products. Selkirk SuperPro / ShelterPro 6" Stainless Steel Class A Chimney, 24"

$84.69

Priced for liquidation. Please reach out with any questions. No returns accepted on these clearance products. Selkirk SuperPro / ShelterPro 6" Stainless Steel Class A Chimney, 12"

$90.00

This Oval to 6" Round is most commonly used for connecting a round flexible chimney liner to a fireplace insert. This connector is used to connect our flexible chimney liner to a top outlet exhaust hole (vertical connection), The Adaptor is made from 316 Stainless steel  Oval 6 7/8 by... Read More

$159.59

Priced for liquidation. Please reach out with any questions. No returns accepted on these clearance products. Selkirk SuperPro / ShelterPro 8" Black Wall Thimble

$203.19

Priced for liquidation. Please reach out with any questions. No returns accepted on these clearance products. Selkirk SuperPro / ShelterPro 8" Dead Soft Aluminum Base Flashing

$44.99

Priced for liquidation. Please reach out with any questions. No returns accepted on these clearance products. Selkirk SuperPro / ShelterPro 8" Spark Arrestor

$61.49

Priced for liquidation. Please reach out with any questions. No returns accepted on these clearance products. Selkirk SuperPro / ShelterPro 8" Roof Support

$416.79

Priced for liquidation. Please reach out with any questions. No returns accepted on these clearance products. Selkirk SuperPro / ShelterPro 8" Insulated Tee with Cap

$24.19

Priced for liquidation. Please reach out with any questions. No returns accepted on these clearance products. Selkirk SuperPro / ShelterPro 8" Galvalume Fire Stop

$649.09

Priced for liquidation. Please reach out with any questions. No returns accepted on these clearance products. Selkirk SuperPro / ShelterPro 8" 30 Degree Elbow Kit

$344.09

Priced for liquidation. Please reach out with any questions. No returns accepted on these clearance products. Selkirk SuperPro / ShelterPro 8" 15 Degree Elbow Kit

$443.79

Priced for liquidation. Please reach out with any questions. No returns accepted on these clearance products. Selkirk SuperPro / ShelterPro 8" Standard Ceiling Support Kit

$314.19

Priced for liquidation. Please reach out with any questions. No returns accepted on these clearance products. Selkirk SuperPro / ShelterPro 8" Cathedral Ceiling Support Kit

$88.69

Priced for liquidation. Please reach out with any questions. No returns accepted on these clearance products. Selkirk SuperPro / ShelterPro 8" Galvalume Flashing, Flat

$61.59

Priced for liquidation. Please reach out with any questions. No returns accepted on these clearance products. Selkirk SuperPro / ShelterPro 8" Adaptor Plate

$99.39

Priced for liquidation. Please reach out with any questions. No returns accepted on these clearance products. Selkirk SuperPro / ShelterPro 8" Attic Insulation Shield

$118.59

Priced for liquidation. Please reach out with any questions. No returns accepted on these clearance products. Selkirk SuperPro / ShelterPro 8" Galvalume Flashing, Adjustable 6/12 to 12/12

$151.19

Priced for liquidation. Please reach out with any questions. No returns accepted on these clearance products. Selkirk SuperPro / ShelterPro 8" Galvalume Flashing, Adjustable 1/12 to 6/12

$346.39

Priced for liquidation. Please reach out with any questions. No returns accepted on these clearance products. Selkirk SuperPro / ShelterPro 6" 15 Degree Elbow Kit

$74.09

Priced for liquidation. Please reach out with any questions. No returns accepted on these clearance products. Selkirk SuperPro / ShelterPro 6" Galvalume Flashing, Flat

$102.59

Priced for liquidation. Please reach out with any questions. No returns accepted on these clearance products. Selkirk SuperPro / ShelterPro 6" Attic Insulation Shield

$147.59

Priced for liquidation. Please reach out with any questions. No returns accepted on these clearance products. Selkirk SuperPro / ShelterPro 6" Galvalume Flashing, Adjustable 6/12 to 12/12

$40.49

Priced for liquidation. Please reach out with any questions. No returns accepted on these clearance products. Selkirk SuperPro / ShelterPro 6" Insulated Tee Cap

$28.00

This 6” x 24” Rock-Vent single-wall black stove pipe is on clearance due to the female end being dented to oval. This would be perfect if you need a small section of pipe that you could cut. You could also attempt to ovalize the pipe to fit an older stove... Read More

$60.00

This 8" stove adaptor has the male fitting with some bends and Extra crimps on the fitting. The outside black has some scratches as well. Used to securely connect double wall black stove pipe to an appliance on the top or out the back of the unit. The inner pipe... Read More

$90.00

This 7” x 36” Rock-Vent double wall black stove pipe is on clearance due to imperfections in the finish. There is also a small dent on the female end that can easily be bent back for a good connection. With a little touch-up paint, this can be brought back to... Read More

$70.00

This 3" x 36" Pellet pipe is on Clearance due to some light Scratches. This would be perfect for a workshop where the appearance of the pipe is not a necessity. Rock-Vent Pellet Pipe is fabricated with a 304L stainless steel inner wall with a painted black galvalume outer wall... Read More

$45.00

This 6” x 36” Heat-Fab single-wall black stove pipe is on clearance due to a few small dents on the male and female ends. The ends of the pipe can be dented back to make a good connection. This would be perfect for a workshop where the appearance of the... Read More

$100.00

This 6” x 48” Rock-Vent double wall black stove pipe is on clearance due to imperfections in the finish. There is also a small dent on the female end that can easily be bent back for a good connection. With a little touch-up paint, this can be brought back to... Read More

$250.00

This 8” x 48” Rock-Vent 304L inner, 430 outer Class A chimney pipe is on clearance due to a few slight dings on the side of the class A pipe. These are small dings and do not affect the overall performance or safety of the system. This would be perfect... Read More

$125.00

This HY-C Stainless Steel Single Flue Chimney Cap stainless steel painted black is Size 9 x 13 and is missing the Mounting Hardware without the screws. Cap is sold as is and is non returnable. One available. Read More

$400.00

This is a 19" copper chimney pot topper with a copper cone lid. This chimney pot topper is in excellent condition and comes with an extended 5" wide mounting flange and an extended 5" length sleeve. This pot topper is perfect for a large chimney pot with an inside diameter... Read More

$200.00

This 26" x 17.5" Knockdown top mount multi flue cap with basic lid has a screen height of 16" and is powder coated black. It is on clearance due to some scratches to the powder coating. looking at it from the ground on top of a chimney, you will never... Read More

$219.00

This 15" x 15" Bolt on single flue chimney cap with a designer lid is in new condition. Constructed from stainless steel, this chimney cap will fit a flue as small as 13.25" x 13.25" and as large as 15" x 15". The designer lid provides a 2.5" lid overhang... Read More

$75.00

This 4" x 48" Rock-Vent pellet vent pipe is on clearance due to a few small dents on the ends of the pipe. The dents can easily be worked out to make a good pipe connection. The pipes also have scratches to the black finish on the pipe. You can... Read More

$29.99

This is a perfect 5" x 8" x 8" rigid liner terra-cotta top plate. The collar of the top plate is 2" in height. Use to seal a flue and to support the support clamp. Non-Returnable. One Available. Read More

$25.00

This 7.5” Pulling cone is in new condition and is perfect for pulling a 7.5” flexible chimney liner down a tight chimney. The quick connect clamp easily attaches and detaches from the liner. This is a perfect solution when installing a 7.5” liner in a tight chimney. The eyelet at... Read More

$20.00

This 6.5 in. Vertical liner to appliance connector is in new condition and has never been used. 316L stainless steel construction. is perfect for connecting a 6.5 in. flexible chimney liner to a wood stove insert. The male end of the connector is a 7 in. male pipe end for... Read More

$35.00

This 3 in. x 45 degree flexible chimney liner fixed elbow is in new condition. This would be perfect for connecting a chimney liner to a pellet stove where the liner has to make a sharp angle through a damper and a smoke shelf. This can also be used for... Read More

$200.00

This 41” x 17” Knockdown multi-flue cap with a basic lid, Powder coated black is in new condition and comes along with all the hardware necessary to install the cap. The screen mesh measures 41” length by 17” in width and has a screen height of 10”. If you are... Read More

$150.00

This 6” Vacu-Stack air cooled chimney cap is on clearance due to a manufacturing flaw that prevents the cap from sitting straight. With a little work, you could slightly bend the lid so that it will look straight on top of a chimney. This is fabricated from stainless steel. This... Read More

$90.00

This 6 in. x 36 in. Rock-Vent double wall black stove pipe is on clearance due to imperfections of the finish. There is also a small dent on the female end that can easily be bent back for a good connection. With a little touch up paint this can be... Read More

$35.00

This 8 in. male to 7 in. female single wall black stove pipe reducer is in new condition. The 8 in. end is crimped to a male end and the 7 in. end is a standard female pipe end. This reducer is fabricated from 22 gauge cold rolled steel. This... Read More

From$150.00

There are three chimney caps available in this listing. Please choose which one you'd like in the dropdown menu. One of each style is available. Please see pictures for details.9" X 9" CLAMP ON SINGLE FLUE WITH DESIGNER LID 3/4" MESHThis 9" x 9" Clamp On Single Flue Cap with... Read More

$38.99

Black Poly Rods with buttonlock ends measure 3 ft. in length and are also compatible with our String Whip Cleaning System. Please add the desired quantity to your shopping cart. Note: Must order (1) 3/8" drill adapter below. Read More