DuraVent Dura Tech Class A Pipe 10" to 14"

DuraVent Dura Tech Class A Chimney Pipe is available in large diameters of 10", 12", and 14". If you require a different diameter, up to 24 inches, please contact us for special orders. This model of DuraVent chimney pipe is UL103 and rated up to 1700 degree Fahrenheit. This chimney system is ideal for zero clearance or masonry fireplaces, furnaces, boilers, water heaters, and more. Requires 2" clearance to combustible materials.

Learn about DuraVent Dura Tech Class A Pipe 10" to 14"

Shop DuraVent Dura Tech Class A Pipe 10" to 14"

Sort & Filter (0)

Clear All

Sort By

Filtered result: 10 of 10

10 Inch Chimney Pipe

From$336.63

DuraTech Class A Chimney Pipe 10" to 14"

DuraTech Large Diameter Class A chimney pipe is available in 10", 12" and 14" diameters. Large diameter, such as 10 inch chimney pipe, are common sizes required for venting a traditional fireplace. DuraTech Class A chimney pipe is UL103 and designed for applications up to 1700 degrees Fahrenheit such as... Read More

DuraTech Roof Flashing 10" to 14"

From$284.26

DuraTech Roof Flashing 10" to 14"

DuraTech Class A chimney flashing is available for a variety of roof pitches. This vented flashing is constructed from galvalume steel. Use this flashing to weatherproof where the chimney pipe is penetrating the roof. Intended to be used on shingled roofs. Available for either 0/12 thru 6/12 roof pitches and... Read More

DuraTech Storm Collar 10" to 14"

From$67.33

DuraTech Storm Collar 10" to 14"

The DuraTech Storm Collar is used to seal off the Roof Flashing where the pipe is coming through the top of the flashing. The Storm Collar is required for any roof penetration. The Storm Collar will fit around the outside of the pipe and sit over the flashing, preventing rain... Read More

DuraTech Anchor Plate 10" to 14"

From$194.50

DuraTech Anchor Plate 10" to 14"

Use the DuraTech Anchor Plate to attach the DuraTech chimney pipe to a masonry fireplace outlet or pre-fab zero clearance fireplace (check firpelace Owner's Manual for approval). Bolt directly to the firpeace to start your chimney pipe. This will only attach to DuraTech chimney pipe. The Anchor Plate provides a... Read More

DuraTech Spark Arrestor Rain Cap 10" to 14"

From$561.05

DuraTech Spark Arrestor Rain Cap 10" to 14"

The DuraTech Chimney Rain Cap with Spark Arrestor will prevent any rain, weather and animals from entering the chimney pipe. The chimney cap easily attaches and unattaches for service and cleanings. Fabricated from stainless steel. The chimney cap is required to maintain the UL listing of the the pipe. Note:... Read More

DuraTech Wall Strap 10" to 14"

From$161.03

DuraTech Wall Strap 10" to 14"

Use the DuraTech Wall Strap to support and stabilize the chimney pipe to the side of the home or inside a chase. The Wall Strap will ensure the 2" clearance that is necessary for the UL listing. A Wall Strap is required every 4' of vertical chimney pipe. The Wall... Read More

DuraTech Class A Elbow 10" to 14"

From$1,275.05

DuraTech Class A Elbow 10" to 14"

The DuraTech 30 degree elbow is used to offset the chimney pipe around obstructions such as rafters, roof joists, or ridge poles. One elbow included. Most installations will require a quantity of two elbows. Offsets and angles greater than 30 degrees are not approved and void the UL103 listing. Fabricated... Read More

DuraTech Elbow Strap 10" to 14"

From$219.09

DuraTech Elbow Strap 10" to 14"

Use the DuraTech Elbow Strap when offsetting the pipe with the elbow kit. The Elbow Strap will help support the weight of the pipe on the offset. The Elbow Strap is required when using the Elbow Kit. For longer offsets an additional Elbow Strap may be required. Straps are 30"... Read More

DuraTech Attic Insulation Shield 10" to 14"

From$708.36

DuraTech Attic Insulation Shield 10" to 14"

The DuraTech Attic Insulation Shield is used when the Class A chimney pipe is passing through an attic space to prevent any insulation from touching and potentially blowing onto the chimney pipe. The Attic Shield can sit over the support box or Firestop Joist Shield when the pipe is passing... Read More

DuraTech Firestop Joist Shield 10" to 14"

From$623.35

DuraTech Firestop Joist Shield 10" to 14"

The DuraTech Firestop Joist Shield is used when the chimney pipe is passing through a floor or ceiling, other than those that include the Ceiling Support. The Firestop sits on the underside of the framing and is adjustable to cover various framing sizes. Measurement Chart: DuraTech Firestop Joist Shield 10"... Read More

Learn About DuraVent Dura Tech Class A Pipe 10" to 14"

DuraVent Dura Tech Large Diameter Class A Pipe is available in 10", 12", and 14" inside diameters. Dura Tech large diameter chimney pipe is used mainly for venting applicable zero clearance fireplaces, masonry fireplaces, or sugar shacks. However, it can also be used to vent furnaces, boilers, water heaters, coffee roasters and more. One of the most common installations is when a chimney is taken down below the roof line, requiring you to convert the masonry chimney to Class A chimney pipe.

Dura Tech 10" thru 14" Class A chimney pipe is a double wall, insulated chimney pipe that meets UL 103 with a temperature rating of up to 1700 degrees F. Dura Tech chimney pipe requires a 2" clearance from any combustible material. Fabricated with a 430 stainless steel inner and outer pipe.

Note:
Dura Tech 10" thru 14" are only compatible with Dura Tech chimney pipes. It will not be compatible with any other manufacturers class A chimney pipe or parts.

Not finding what you are looking for? Feel free to contact one of Rockford Chimney Supply's Certified Technicians that can assist you in choosing the correct parts or a special order.

DIY Center

(AKA ‘The Rockford Files’)

From video tutorials to product walkthroughs, we have a variety of DIY resources just for you! Click the button below to view our entire library.

START LEARNING

Need Help?

We are here to answer all of your questions

1-866-708-2446

OR

CONTACT US

Our 316Ti flexible chimney liner and chimney liner components have passed the rigorous testing at the Underwriters Laboratories with best in class status and are UL Listed. So if you are looking for UL listed chimney liner sold directly to homeowners, then look no further than Rockford Chimney

Customer Testimonials

Back in July you gave me excellent advice re. sizing/purchasing a flue liner for the chimney associated with my wood stove. I'd like to thank you once agai... More

—AE Northfield, MN

A few weeks ago I ordered a chimney liner system for my fireplace insert. Your salesman recommended the liner system plus the insulating blanket. I just wa... More

—AH Happy customer

Just got around to installing my new smooth flexible liner and deluxe terra cotta cap (wow). The quality of your product is second to none. Very pleased an... More

—B.B. from Massachusetts

Thanks so much for the great tech service from Dennis, very knowledgable, friendly and proffessional.Your website is the best, beats your competition by fa... More

—Bill in Knoxville

Sue and Dennis, I received the final part of my order yesterday (the chimney cap that actually fits over the chimney chase). It looks wonderfu... More

—CC, VA

Hello, I was shopping for an fireplace insert and called RCS to ask why they were so much cheaper than my local guy, the reply was " we sell thousand of th... More

—Chris, PA.