All

$80.00

The Digital Wall Thermostat is a great way to keep the home warm and cozy, especially when the pellet stove is the primary heat source of the home. This will allow you to control the temperature of the room without having to turn the stove on or off. Once the... Read More

$70.00

This Fresh Air Intake Kit includes a 3" x 10' aluminum insulated flexible pipe and the outside air hood. This kit is perfect for short runs when going right through the wall behind the stove. Make sure the outside air hood is in a location where it will not be... Read More

$150.00

Looking to get even more heat out of the stove? The optional Airmate is installed over the stove top and allows more heat to be generated for the blower to push over the top of the stove. The louvered front provides a stylish accent to the stove and while increasing... Read More

$270.00

The optional Variable Speed Blower is a great way to help spread the heat across the room more quickly. The 100 CFM blower mounts to the back of the stove and comes with an 8' power 120/AC power cord. The blower runs very quietly in the background. Read More

$60.00

This Fresh Air Intake Kit includes a 3" x 10' aluminum insulated flexible pipe and the outside air hood. This kit is perfect for short runs when going right through the wall behind the stove. Make sure the outside air hood is in a location where it will not be... Read More

$180.00

The Hopper Extension allows you to reload your pellet stove less frequently. The extension will allow the pellet stove to hold 20 more pounds of pellets, making the total hopper capacity up to 80 pounds. This will allow the stove to run for up to an additional 17 hours. The... Read More

$60.00

The triple hot air supply kit allows you to easily add three 6" diameter hot air ducts off one side of the appliance. The Heat Commander is approved for a minimum of 6" hot air ducts and a maximum of 10 hot air ducts. This can be used to attach... Read More

$110.00

The cold air return with filter is recommended to ensure the system has proper static pressure so the hot air distribution is running correctly and evenly. You may run this to an existing cold air return. The cold air return should be constructed in a way that the volume of... Read More

$110.00

Tired of constantly running to the store to replace your furnace air filters. The 20" x 15" x 1" washable aluminum air filter will be the last air filter you purchase. Simply remove the air filter and wash it with soap and water. A filter spray can be used to... Read More

$60.00

The Cardboard frame air filter with support allows you to use regular disposable 20" x 15" x 1" cardboard air filters. An air filter is required to prevent dirt, dust or debris, from entering the hot air ducts into the living space. The frame provides everything necessary to support a... Read More

$220.00

The optional Variable Speed Blower is a great way to help spread the heat across the room more quickly. The Powerful 130 CFM blower mounts to the back of the stove and comes with an 8' power 120/AC power cord. The blower runs in the background very quietly. Read More

$100.00

The Rigid Firescreen allows you to burn wood in the stove with the door open just like an old-time fireplace. Hear the crackle of the wood, watch the flames dance around in the firebox and relax around the wood insert on a cold winter's night. The Rigid Firescreen is easy... Read More

$150.00

A fresh air intake is great for any stove. This will ensure the stove has the proper combustion air to run efficiently. If your home is very air tight, you would need an air intake kit. The kit comes with the intake adapter for the stove, 2 clamps and the... Read More

$220.00

Are you looking for a way to reduce the clearances for the Chic-Choc cook stove to get closer to the combustible wall? The Certified Module Heat Shield is the perfect solution. The simple but elegant design will blend well with any decor. Measuring 84 1/8" Wide x 60" Height x... Read More

$600.00

Are you looking for a way to reduce the clearances for the Chic-Choc cook stove to get closer to the combustible wall? The Certified Module Heat Shield is the perfect solution. The simple but elegant design will blend well with any decor. Measuring 84 1/8" Wide x 60" Height x... Read More

$140.00

A fresh air intake is great for any stove. This will ensure the stove has the proper combustion air to run efficiently. If your home is very air tight, you would need an air intake kit. The kit comes with the intake adapter for the stove, 2 clamps and the... Read More

$120.00

Wood stoves can take up a lot of space in a home. The optional heat shield is a great way to save a little extra space in your home. The heat shield can only be used with a double wall pipe so you are able to get the stove a... Read More

$90.00

Steatite is similar to soapstone which is able to withstand extremely hot temperatures and slowly release the heat. This is perfect for evenly cooking anything from meats, fish and vegetables. Steatite is non-porous and extremely dense which makes for a hygienic cooking surface. The perimeter of the cooking plate has... Read More

$150.00

A fresh air intake is great for any stove. This will ensure the stove has the proper combustion air to run efficiently. If your home is very air tight, you would need an air intake kit. The kit comes with the intake adapter for the stove, 2 clamps and the... Read More

From$440.00

The Corner Modular Floor Protection Systems protects a combustible floor under a wood burning stove and prevents embers from falling on the floor during reloading. Insulated with 1/2" Micore 300 and rated with an R factor of 1.03 which makes it the perfect choice for wood stoves that require floor... Read More

$120.00

46 3/4" x 18" Modular Floor Protection System Extension Read More

$300.00

The Modular Floor Protection Systems protects a combustible floor under a wood burning stove and prevents embers from falling on the floor during reloading. Insulated with 1/2" Micore 300 and rated with an R factor of 1.03 which makes it the perfect choice for wood stoves that require floor protection.... Read More

$80.00

The optional Ash Drawer Kit is a great way to easily clean out the ashes from the stove. The ash drawer kit easily mounts inside the pedestal of the stove and easily slides in and out to service the ashes. No need to have an ash bucket sitting on your... Read More

$75.00

A fresh air intake is great for any stove. This will ensure the stove has the proper combustion air to run efficiently. If your home is very air tight, you would need an air intake kit. The kit comes with the intake adapter for the stove, 2 clamps and the... Read More

$4,039.00

The Country Stoves Carrollton 300GL Wood Burning Insert is a great option for updating your inefficient fireplace while providing a stylish look and endless heat throughout the cold winter months. The 3.0 cubic foot firebox is capable of handling up to an 21" log resulting in burn times of up... Read More

$3,199.00

The Country Stoves Georgetown 300GL Freestanding Wood Burning Stove is as elegant as it is efficient. Equipped with the innovative TFT, Thermal Fin Technology that utilizes a cast iron heat exchanger to allow for more efficient heating. The combination of the TFT technology and the optional powerful 700 CFM stove... Read More

$2,469.00

The Country Stoves Georgetown 230GL Freestanding Wood Burning Stove is as elegant as it is efficient. Equipped with the innovative TFT or Thermal Fin Technology which utilizes a cast iron heat exchanger that allows for more efficient heating. The combination of the TFT technology and the optional powerful 700 CFM... Read More

$2,729.00

The Breckwell Big E Pellet stove is a powerful heating solution that offers a large 140 pound hopper that is capable of burning for three straight days of heat with one full load of pellets. The "Hot Rod" automatic ignition system effortlessly lights the pellets without any fire gel needed.... Read More

$400.00

The US Fireplace Top Damper 18" x 18" has a dent on the corner, damper still seals tight, provides an energy tight seal for any fireplace while also providing rain and animal protection. Sold as is, non-returnable. One Available. Read More

From$1,469.00

Introducing the SimpliFire Allusion Platinum Electric Fireplace, a masterpiece of modern design and innovative functionality. The Allusion Platinum offers a taller viewing area compared to the Allusion electric fireplace which offers more dazzling views of the flames. This stunning fireplace seamlessly blends contemporary aesthetics with advanced technology to create a... Read More

$750.00

8" x30 Degree Class A Elbow Kit New - Clearance Galvalume Rock-Vent Class A Chimney Pipe Elbow Kits 30 degree options. Each elbow kit includes 2 elbows and 1 elbow support. Elbows are used to offset obstructions such as framing joists in your installation. The elbow support is required between... Read More

$65.00

8" x 24" 304L Stainless Steel Rigid Chimney Liner Dented - Clearance 8 in. x 24 in. 304L Rigid Stainless Steel pipe. The pipes have a few dents on the ends but can be easily straightened out. They would be great for a shop or garage setup. 24 gauge stainless... Read More

$60.00

4" to 3" Pellet with No Tee Cap - Clearance The Pellet Tee connects a 3” pellet stove to a 4” chimney liner. This connector features a removable snout and the quick connect band. (no Tee Cap) Read More

$70.00

Selkirk Double Wall 8"x12"Slightly Scratched. Sold as is, non-returnable. One available. Selkirk Double Wall Black Pipe is most commonly used as interior connector pipe. The 8" diameter is the inner diameter measurement. For installed lengths, remember to subtract 1-3/8" per joint. Minimum clearance to combustibles is 8". The maximum recommended... Read More

$150.00

Selkirk #208012U- light denting on outer inner good, This 8 in. x 12 in. Selkirk Ultra-Temp has a large dent on the outer stainless coating. There are no defects to the inner liner of the pipe. The Selkirk Metalbestos Chimney System is ideal for venting residential heating appliances burning wood,... Read More

$100.00

Selkirk 6"x36"- DSP double wall- light denting and scratches. Note: Double wall stove pipe is only compatible with the same manufacturer's brand pipe, therefore this can only be used with Selkirk Black Double Wall Pipe. The main listings of Double Wall pipe on our website are not compatible with this... Read More

From$1,169.00

The SimpliFire Allusion Wall Mounted Fireplace is a sleek, modern fireplace which offers a seamless blend of style and functionality, designed to complement any décor. The slim profile allows for easy installation which can either be hung on the wall, semi recessed in a 2x4 wall or fully recessed in... Read More

$3,799.00

Get a FREE ash vacuum (ACO2586) The Drolet Eco-65R pellet stove capable of producing long lasting, stable heat with minimum effort. The giant hopper is capable of holding 125 pounds of wood pellets able to burn for up to 100 hours on one load of pellets. With a .77 g/h... Read More

$100.00

The stainless steel flue cap would fit an 14" x 10" flue/chimney, this would have pressure bolts to adhere it to the side of the chimney tile. Read More

$60.00

8 3/4" x 6 1/2" rectangle female to 8" round male, Mates a dripless connection between rectangle flex liner and the round opening or vertical pipe on your appliance. Read More

$60.00

Female to male dripless seam. bottom 8 5/8" x 4 1/4"- top 10" x 5" Connect flex to flex, rigid to flex, and more. Read More

From$1,999.00

Introducing the Amantii Lynwood Series Cast Iron Electric Stove, a perfect blend of timeless elegance and modern efficiency. This exquisite stove, crafted from durable cast iron, offers a remarkable heating capacity of up to 5,000 BTUs, providing warmth and comfort to spaces up to 500 square feet. The Lynwood Series... Read More

From$3,776.72

Introducing the True North TN40 Pellet Stove, a masterful blend of efficiency, eco-friendliness, and modern design, perfect for those seeking superior home heating solutions. Available in either a leg model or a pedestal model stove to perfectly fit the decor of your home. This pellet stove is engineered to deliver... Read More

$4,191.75

Introducing the True North TN40 Pellet Insert, a remarkable heating solution designed to transform your living space with efficient and reliable warmth. This advanced pellet insert boasts an impressive heating capacity, delivering up to 36,000 BTUs to ensure your home stays cozy even during the coldest months. Ideal for medium... Read More

$150.00

6” Rock-Vent Double wall Black stove pipe 48” in length, this pipe has some scratches and dents in the outer shell and the inner stainless sleeve is free of defects.  Compatible with our black stove pipe along with Ventis, Champion, and Nexvent-19   One Available. Non-Returnable.   Read More

$200.00

10” x 48” 316L  stainless steel pipe, the pipes have a few dents on the end and a slight oval shape from shipping damage which can be straightened out. Great for a shop or garage setup. It has a smooth interior wall providing you with optimum draft and flow. Use... Read More

$100.00

This 6" x 8” x 13” Deluxe Hinged Terra-Cotta Top Plate With Rain cap is missing 2 of the threaded mount Inserts and would only have 2 bolts attached to the Cap to one size.  You will need 1.5" of clay tile protruding from the chimney crown to attach the... Read More

$1,799.00

Introducing the elegant and functional Amantii Cube 2025WM Freestanding Electric Fireplace. This state-of-the-art electric fireplace offers an expansive heating capacity, effectively warming spaces up to 500 square feet with a powerful output of 5,000 BTUs, for the coldest days. The Cube 2025WM is not just about heating but also about... Read More

From$4,699.00

Experience the pinnacle of sophisticated heating with The Symmetry Xtra Tall Bespoke Electric Fireplace. This luxurious model combines an impressive heating capability with cutting-edge technology and stunning design features. It efficiently warms areas up to 400 square feet with a powerful output of 5,500 BTUs, ensuring your space remains cozy... Read More

From$1,799.00

Tired of your old drafty inefficient fireplace? Transform your fireplace with the sleek sophistication of the Amantii TRD Electric Fireplace Inserts. These cutting-edge units not only elevate the aesthetic of any room but also provide an eco-friendly, highly efficient alternative to traditional wood-burning or gas fireplaces. End the hassle and... Read More

$1,699.00

Introducing the modern and elegant Amantii FS-26-922 Smart Freestanding Electric Fireplace. This sophisticated unit combines exceptional modern heating technology with an aesthetic that complements any home decor. The beveled three pane glass provides the ultimate viewing experience. The FS-26-922 features a powerful output of 5,000 BTUs, providing efficient and even heat... Read More

From$4,499.00

Introducing the ultimate combination of style and innovation - the Modern Flames Orion Slim electric fireplace. This sleek and sophisticated fireplace boasts a modern design and is packed with cutting edge features that will elevate the ambience of any room. The Slim Design will fit between 2" x 6" walls... Read More

From$1,499.00

The Modern Flames Spectrum Slimline electric fireplace is the newest addition to our line of stylish and innovative fireplaces. Designed to enhance any living space, this modern and sleek fireplace brings both warmth and ambiance to your home. The Spectrum Slimline features advanced LED technology, creating a realistic and mesmerizing... Read More

From$2,249.00

The Orion Electric Fireplace Insert is the perfect solution for updating an old inefficient traditional fireplace. Simply insert the electric insert into the fireplace and wire it to your electrical and never have to worry about the mess and maintenance that is involved with a traditional fireplace. Optional trim flashings... Read More

From$47.54

The DuraVent PelletVent Pro House Shield is used to protect the exterior structure from the heat and exhaust emission from damaging the exterior siding. The House Shield is suggested to be used if the home or structure has vinyl siding. The House Shield will help prevent the vinyl siding from... Read More

$107.95

The DuraVent PelletVent Pro Increaser is used to convert a 3" PelletVent Pro Pipe to 4" PelletVent Pro Pipe. The 3" side is a male pipe end and the 4" side is a female pipe end. This is used when a stove with a 3" diameter exhaust hole requires a... Read More

From$95.13

The DuraVent PelletVent Pro Metal Roof Flashing is used to waterproof around the PelletVent Pro Pipe as it passes through either a metal, slate, or terra-cotta tile roof. The base of the flashing is made from dead soft aluminum that is capable of forming to the irregular shape of metal,... Read More

From$91.09

DuraVent PelletVent Pro Flat Ceiling Support Box with Firestop Spacer is used to support the PelletVent pipe when passing through a flat ceiling. The Ceiling Support comes with an integrated trim for a finished look as well as a support clamp that wraps around the pipe and bears the weight... Read More

From$95.84

The DuraVent PelletVent Pro Attic Insulation Shield is used in an attic space to prevent anything from coming in contact with the PelletVent Pro Pipe. The Attic Insulation Shield will provide the necessary 1" clearance from combustible materials. The adjustable sleeve is able to adjust from 11" to 20" to... Read More

From$202.63

The DuraVent PelletVent Pro Standard Tee with Clean-Out Cap is used to connect PelletVent Pro pipe to a stove with a rear exhaust (in conjunction with the Stove Adapter). It can also be used to turn the pipe vertically once the pipe has passed through a wall thimble for exterior... Read More

From$118.73

The DuraVent PelletVent Pro Flex Liner Adapter with Trim is used to connect a PelletVent Pro Pipe to a chimney liner when passing through a masonry chimney thimble. You can either connect the chimney liner or a chimney liner tee connection to the backside of the adapter. The front side... Read More

From$102.25

The DuraVent PelletVent Pro Slips Sections are ideal for getting the correct length of pipe needed for specific installations. The PelletVent Pro pipe cannot be cut to length making the Slip Sections the perfect solution when you need a specific length of pipe. The Slip Sections must only be installed... Read More

$175.00

Upgrade and enhance your Napoleon BT36K Premium 3" beveled trim kit-Black today. Color: Black, 3" thick, Sleek, black beveled finish trim. Applicable Napoleon fireplaces: 35" Ascent fireplace, 36" Ascent fireplaces, 36" Ascent X fireplace One Available. Non-Returnable.   Read More

$225.00

Napoleon's 36 in" Westminster Grey Herringbone Decorative brick panels made for use with Napoleon Ascent Series Gas Fireplace.  (3) pc. set- (2) sides 11" x 20 1/2"- (1) rear 16 1/4" x 15 3/4" One Available. Non-Returnable. Read More

$35.00

This cable is in new condition. This cable shield is helpful when installing a Lyemance damper cable. If the cable has to make a bend around a corner, such as with a lintel or smoke shelf, then this cable shield will protect it from friction fraying. One Available. Non-Returnable.   Read More

From$182.38

The SuperPro / SuperVent Wall Thimble is used to provide safe passage of the chimney pipe as it passes through a wall. The Wall Thimble can accommodate a wall thickness from 4.5 in. to 8.75 in. The black interior firestop will provide a finished look for the wall penetration and... Read More

From$68.06

The SuperPro / SuperVent Wall Band is used to stabilize the pipe on the side of the home for through the wall chimney systems and also inside a chase for a zero clearance fireplace installation. The Wall Band mounts directly to the wall and provides the necessary 2 in. clearance... Read More

From$48.64

The SuperPro / SuperVent Rafter Radiation Shield must be installed where the chimney is enclosed immediately below the roof line. An example of this is when the attic space of a house is being used as living space (ie. bedroom, guestroom etc.). It must also be installed when height restrictions... Read More

From$17.58

The SuperPro / SuperVent Locking Bands are used to add stability for the chimney pipe connections. The Locking Bands are required for any elbow offset connection, the horizontal pipe connection to the tee snout and for any pipe joint that is extended below the Cathedral Ceiling Support Box. Locking Bands... Read More

From$145.90

SuperPro / SuperVent Firestop Joist Shield is used to safely pass the SuperPro / SuperVent chimney pipe through an additional level of the home above the initial ceiling support. The Firestop Joist Shield mounts between the ceiling joist with the plate side pointing down. The Firestop provides the 2 in.... Read More

From$46.22

The SuperPro / SuperVent Finishing Plate is used to provide a finished look when the Class A chimney pipe is passing through a soffit or flat ceiling when a ceiling support box is not being used. It provides the mandatory 2 in. clearance from combustible material. Constructed from galvanized steel.... Read More

From$191.96

The SuperPro / SuperVent Tee Support is used to support the weight of the SuperPro / SuperVent Tee and the vertical chimney stack. The Tee Support can support up to 38 feet of vertical chimney pipe. When mounted to the side of a structure it will provide the necessary 2 in. clearance from... Read More

From$488.72

The SuperPro / SuperVent Tee and Tee Cap is used for horizontal venting application when the pipe needs to pass through the wall and run up the side of the home. The Tee connection is what turns the pipe from horizontal to vertical. The Tee will need to be mounted... Read More

From$218.84

The SuperPro / SuperVent Attic Insulation Shield is used to prevent any insulation or debris in an attic from coming in contact with the chimney pipe that is passing through a ceiling into an attic while maintaining the necessary 2 in. clearance from combustible material. The Attic Insulation Shield is... Read More

From$148.65

The DuraPlus Class A Wall Thimble is used to safely pass a section of DuraPlus Chimney Pipe through a combustible wall. The Wall Thimble can accommodate a wall thickness between 4.25 in. and 7.25 in. For thicker walls, a field fabricated extension of up to 16 in. can be used... Read More

From$517.20

The DuraPlus Tee with Cleanout Cap is used for through the wall chimney installation. The DuraPlus Tee mounts directly on the starter section of the DuraPlus Tee Support and allows the necessary ventilation needed for the DuraPlus Chimney Pipe. A section of DuraPlus Chimney Pipe must be installed on the... Read More

From$194.18

The DuraPlus Tee Support is used to support the DuraPlus Class A Tee Connection. The Tee Support is mounted to the side of the building and the tee sits on the starter section. The clean out of the tee will mount to the underside of the tee support so you... Read More

From$237.11

The DuraPlus Flat Ceiling Support Box is used to support the weight of the Class A Pipe when penetrating a flat ceiling. It is painted black and comes with trim to provide a finished look at the ceiling. The support box will extend 2 in. below the flat ceiling and... Read More

From$127.10

The DuraPlus Standard Roof Flashing is used to weatherproof the pipe when it is passing through a shingled roof. The Standard Flashing is available for either a 0/12 through 6/12 roof pitch or for 7/12 through 12/12 roofs. The top side of the flashing will tuck under the shingles while... Read More

From$144.16

The DuraPlus Firestop Radiation Shield is used when the Class A Chimney Pipe is extending through a ceiling or floor where a support box is not installed. Most commonly used when passing through a second level of a home into an attic space. The Firestop fits on the underside of... Read More

From$227.02

The DuraPlus Extended Roof Bracket is used to stabilize the Dura-Vent Chimney Pipe above the roof. The Extended Roof Bracket should be installed if the chimney pipe is extending more than 4 ft. above the roof. The adjustable poles can extend from 67 in. to 114 in. for varying roof... Read More

From$71.68

The DuraPlus Class A Elbow Strap is used to prevent excess weight on the angled chimney pipe. An extra elbow strap may be necessary for long offset installations. The elbow strap will wrap around the top elbow and the 25 in. long straps will get anchored to the roof joists.... Read More

From$573.10

The DuraPlus Class A Elbow Kit is used to offset the Class A Chimney Pipe when obstacles and obstructions are in the way of the pipe's path. Available in 15 and 30 degrees that include a set of two elbows and the elbow support. The first elbow will angle the... Read More

From$206.31

The DuraPlus Pitched/Cathedral Ceiling Support Box is used to support the DuraPlus Chimney Pipe when passing through a combustible cathedral ceiling. The support box is 24 in. long and capable of supporting up to 35 ft. of chimney pipe. The inside of the support box is equipped with a twist... Read More

$160.71

The DuraPlus Attic Insulation Shield is required in an installation where the chimney pipe is passing through an attic space. The Attic Shield attaches to either a Firestop Joist Shield or a Ceiling Support Box. The Attic Shield consists of two parts: the base and the storm collar. The two... Read More

From$207.68

The DuraTech Extended Wall Support Bracket is used to support the pipe off the side of the home when bypassing obstructions or roof overhangs. Typically used for through the wall venting. The Extended Wall Support Bracket can be used in place of the Tee Support and is capable of supporting... Read More

From$89.81

The DuraTech Wall Strap is used for interior and exterior installations to provide lateral support for the chimney pipe. The Wall Strap is required every 8 ft. above either the tee support for through the wall installation and the ceiling box for a through the ceiling or inside a chase... Read More

From$145.30

The DuraTech Firestop Joist Shield is used when the DuraTech Class A pipe is passing through a floor or ceiling where a ceiling support box is not used. The plate gets mounted to the underside of the ceiling and the sleeve is adjustable to cover the framing. Note: The Firestop... Read More

From$142.01

The DuraTech Attic Insulation Shield is used when the pipe is going through a ceiling into an attic space to prevent anything from coming in contact with the Class A pipe. This prevents any debris or insulation from getting into the ceiling support box. The Attic Insulation Shield consists of... Read More

From$217.94

The DuraTech Class A Tee Support is used to support the Class A Tee connection (sold separately) to carry the weight of the vertical chimney pipe outside. The Class A Tee Support will mount directly to the side of the building underneath the wall thimble. The tee connection will sit in... Read More

From$457.89

The DuraTech Insulated Class A Tee and Tee Cap is used for through the wall installations to turn the horizontal pipe coming through the wall vertically for the exterior chimney stack. The Insulated Tee comes with a removable clean out cap to make cleaning and inspections a breeze. The Tee... Read More

From$118.81

The DuraTech Class A Anchor Plate is used when connecting DuraTech chimney pipe to either a prefab zero clearance or a masonry fireplace. The Anchor Plate is the starter section that will mount directly to the exhaust hole of the fireplace and transition to the DuraTech Chimney Pipe. Once the... Read More

From$18.82

The DuraTech Locking Band is used for extra support and security when using offset elbows or horizontally venting the pipe connection at the tee. The Locking Bands are not required for the vertical pipe section. However, they will prevent the pipe from potentially twisting off during cleanings or inspections. Measurement... Read More

From$430.84

The DuraTech Telescoping Chimney Pipe is capable of adjusting from 14" to 21". This can be extremely helpful when you need a certain section of chimney pipe in between offsetting elbows or when a very specific length of pipe is needed through the wall thimble. Since the class A chimney... Read More

$150.00

6 in. Rock-Vent Double Wall Black stove pipe 48 in. length. This pipe has some scratches and dents in the outer shell and also a large dent on the female end. The inner stainless sleeve is free of defects.  The stainless steel inner liner, 1/2" air space, and outer casing... Read More

$150.00

11 in. x 48 in. 304L stainless steel pipe. The pipes have a few dents on the end and can be straightened out. The pipes will work very well in a shop or garage environment. The smooth interior wall provides ample draft and flow. Use for wood and wood pellet-burning appliances. Non-Returnable. Two Available. Read More

$100.00

The 16 in. storm collar has a cosmetic dent on the collar. Install the stainless steel storm collar around the rigid liner right above the support clamp to keep moisture from entering the flue liner or the chimney cavity. Non-Returnable. One Available. Read More

Sold out

$200.00

This 6 in. x 36 in. Selkirk Ultra-Temp has a large dent on the outer stainless coating. There are no defects to the inner liner of the pipe. The Selkirk Metalbestos Chimney System is ideal for venting residential heating appliances burning wood, #2 oil, and natural and LP gas. Selkirk... Read More

$25.00

This stove rope gasket is in new condition and measures ⅝ in. x 84 in. The braided gaskets are manufactured from textured fiberglass for high-temperature sealing up to 1000° F. The graphite infused material is soft and flexible and suitable for most gasket applications.  Color: Black. One Available. Non-Returnable.  Read More

$160.00

6 in. Rock-Vent Double wall Black stove pipe 48 in. length. The pipe has some scratches and dents in the outer shell, and the inner stainless sleeve is free of defects. Two Available. Non-Returnable. Read More